Designed for wide format hard hats, easily stretches onto brim

Does not block peripheral vision

Shields ears and neck from sun exposure

FR micro-mesh knit allows unrestricted airflow

Compliance:

Meets NFPA 70E requirements

ATPV= 6 cal/cm2

HRC/ CAT 1

OSHA 1910.269

Meets ASTM F1506

NESC 2012

Made by Benchmark FR in the United States using GOAT Flex: Cotton, Cellulose, Poly, Spandex blend.

This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.

Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 1 or "CAT 1" with an Arc Rating (ATPV) = 6 cal/cm2

This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not inteded for fire fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistat properties for the life of the garment provided wash and care instructions are followed.

According to NFPA 70E other apparel that does not "meet the requirements regarding melting, or made from materials that do not self extinguish are not allowed to be worn. So don't use the plastic orange or lime polyester neck shades you see road workers in. If there were an arc flash or flash fire, you would look like a burning candle wearing a hard hat! It is proudly made in the USA.